 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CORPORATION Low Power, 400MHz High Speed Triple Buffer with Level Shifter CVA4403N FEATURES * Slew Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11000V/s * Wide Bandwidth. . . . . . . . . . . . . . . . . . . . . . . . . . 400MHz . . . 100mA * Output Current . . . . . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .3V to 13V * Wide Supply Voltage * Supply Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5mA Shift. . . . . . * LevelBias Current . . . . . . . . . . . . . . . . . . . . . . . . . . VIN -3V * Low * CRT Amplifier Drivers * Coaxial Cable Driver GENERAL DESCRIPTION The CVA4403N is specifically designed to interface a pre-amplifier and an active load high speed CRT driver. It features a unique capability of level shifting the pre-amplifier output lower by 3V without degrading the frequency response of the pre-amplifier. The CVA4403N delivers -3dB Bandwidth of 400MHz and 11000V/S while drawing less than 5ma of supply current. APPLICATIONS ORDERING INFORMATION Part CVA4403N Package Plastic Dip 16 Lead Temperature Range -20oC to +100oC PIN CONFIGURATION PLASTIC DIP -VCC 1 16 -VCC N/C VIN1 VIN2 2 3 4 15 N/C 14 VOUT1 13 +VCC -VCC VIN3 +VCC 5 6 7 12 VOUT2 11 VOUT3 10 +VCC N/C 8 TOP VIEW 9 N/C 1Q-12 CALOGIC CORPORATION, 237 Whitney Place, Fremont, California 94539, Telephone: 510-656-2900, FAX: 510-651-3025 CVA4403N CORPORATION ABSOLUTE MAXIMUM RATINGS (Note 1) Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13V Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vsupply Storage Temperature Range . . . . . . . . . . . . -65oC to +150oC Lead Temperature (Soldering 10 seconds) . . . . . . . . . . . . . . . . . . . . . . 260oC Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . (Note 4) ESD Tolerance (Note 3). . . . . . . . . . . . . . . . . . . . . . . 2000V Thermal Resistance (JA) N Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95oC/W Thermal Resistance (JC) N Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50oC/W Maximum Junction Temperature . . . . . . . . . . . . . . . . . . 150oC DC ELECTRICAL CHARACTERISTICS The following specifications apply for Supply Voltage = 12V, VCM = 0, RL 100K and RS = 50 unless otherwise noted. SYMBOL AV1 AV2 VOS IB RIN CIN RO IS VO IOUT CHARACTERISTICS Voltage Gain 1 Voltage Gain 2 Offset Voltage Input Bias Current Input Resistance Input Capacitance Output Resistance Supply Current Output Swing Output Current TYP 0.99 0.80 10 1 0.5 3.5 3 5 5 150 10 7.5 5 100 Limit (Note 5) 0.96 0.78 50 25 mV Max A Max M pF Max mA Max V Min mA RL = 100, VIN = 2V RL = RL = 100, VIN = 8V (VOUT = VIN -3V) VIN = 10V UNITS V/V Min RL = , VIN = 3V (VMIN = 0V, VMAX = 7V) VPP = 7V, RL = 680, CL = 39pF RL = RL = RL = 100 CONDITIONS AC ELECTRICAL CHARACTERISTICS The following specifications apply for Supply Voltage = 12V, VCM = 0, RL 100K and RS = 50 unless otherwise noted. SYMBOL SR1 SSBW PBW t r, t f t pd CHARACTERISTICS Slew Rate 1 Small Signal Bandwidth Power Bandwidth Rise Time Fall Time Propagation Delay Time TYP 11000 400 100 1.2 2.0 1.7 ns ns Limit (Note 5) 8000 200 MHz UNITS V/s CONDITIONS VIN = 5V, RL = 100 (Note 2) VIN = 100mVPP, RL = 100 CL 10pF VIN = 4V, RL = 100 CL 10pF RL = 100, CL 10pF VIN = 0.5V RL = 100, CL 10pF VIN = 0.5V Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. DC and AC electrical specifications do not apply when operating the device beyond its rated operating conditions. Note 2: Slew rate is measured with 50 source impedance at 25oC. Slew rate is measured between VO = +5V and -5V. Note 3: The test circuit consists of the human body model of 120pF in series with 1500. Note 4: The maximum power dissipation is a function of T J(max), JA and TA. The maximum allowable power dissipation at any ambient temperature is PD = (T J(max) - TA)/JA. Note 5: Limits are guaranteed by testing, correlation or periodic characterization. CALOGIC CORPORATION, 237 Whitney Place, Fremont, California 94539, Telephone: 510-656-2900, FAX: 510-651-3025 |
Price & Availability of CVA4403N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |